FrameMaker Ver5.5E(PC) Di152/Di183 MECHANICAL/ELECTRICAL
01.09.05
M-45
19-3.
Fusing Temperature Control
• The Fusing Roller Heater Lamp is turned ON and OFF to keep a set temperature on the
surface of the Fusing Roller.
• The Fusing Roller surface temperature is detected by using a thermistor that translates
the temperature to a corresponding electrical signal.
• If the Fusing Roller temperature becomes excessively high, the Fusing Roller Heater
Lamp is shut down.
19-4.
CPM Control
• If paper of a small size (width of 250 mm or less) or thick paper is used to run a multi-
copy cycle, the temperature on the edges of the Fusing Rollers tends to run high, mean-
ing that the temperature of the Fusing Rollers varies among different spots of the rollers.
• When the cumulative number of copies made through continuous copy cycles* exceeds
30, the paper take-up interval is made longer, thereby allowing the temperatures of the
Fusing Rollers at different spots to be uniform.
✽
Continuous copy cycle: Continuous copy cycles run with an interval of 2 min. or less
between cycles.
Machine Condition or Paper Type
Mode 1
Mode 2
Mode 3
Standby
180 °C
180 °C
→
170 °C
170 °C
Plain paper (width 251 mm or more)
190 °C
190 °C
→
170 °C
170 °C
Plain paper (width 250 mm or less)
160 °C
160 °C
160 °C
Thick paper (width 251 mm or more)
210 °C
210 °C
→
190 °C
190 °C
Thick paper (width 250 mm or less)
200 °C
200 °C
→
190 °C
190 °C
OHP transparencies (width 251 mm or more)
180 °C
180 °C
→
165 °C
165 °C
OHP transparencies (width 250 mm or less)
155 °C
155 °C
155 °C
Elevtrical Component
Control Signal
ON
OFF
Wiring Diagram
H1
PWB-A PJ10A-7
L
H
1-D
(˚C)
155
170
180
190
30 sec.
or less
Mode 1
5 min
Mode 2
1 min
Mode 3
200
<Temperature Control in Standby
4021M513CA
Warm-up completed
Summary of Contents for D1531iD
