FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-24
(14) ADF Original Glass Check
• The original scanning area of the ADF is scanned to check for possible dirt or scratches
on the glass. The scanned area is produced as a copy.
<Procedure>
• Press the Start key to start the sequence.
✽
For details, see the relevant option service manual.
(15) Scanner Move Check
• This function is used to check the drive for the Scanner.
• It is also used when securing the Scanner in position with the fixing pin (for transportation
of the machine).
<Procedure>
• Press the Start key. This will move the Scanner to the left and stop.
(16) Serial No. Display
• This function is used to display the serial number (consisting of 8 digits).
<Procedure>
• Press the Start key to display the serial number.
E.g.: The Display shows “Sn”
→
“12”
→
“345”
→
“678” in that order if the serial number is
12345678.
Summary of Contents for D1531iD
