DEVANT SBS-200, User Manual

Page: 10 / 22

GB-9
Battery replacement
If the distance required between the remote control unit and main unit decreases, the battery may be
exhausted. In this case, replace the battery with a new one.
• For information about the collection of batteries, please contact your local municipality, your
waste disposal service or the place where you purchased them.
•
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type.
Battery Precautions
• Be sure to insert the battery with the positive "+" and negative "-" polarities correctly positioned.
• If the battery leaks, wipe away the leakage inside the battery compartment and replace the
battery with a new one.
• If the remote control unit is not to be used for a long time (more than a month), remove the
battery from the remote control unit to prevent it from being exhausted.
• Do not use any batteries other than those specified.
• Do not heat or disassemble batteries. Never throw them in fire or water.
• Do not carry or store batteries with other metallic objects. The batteries could short circuit, leak
or explode.
Remote Control Operation Range
The supplied remote control unit allows the unit to be operated from a distance.
When using the remote control unit, point it towards the remote sensor within 60° horizontally and
20° vertically of the front of the unit.
Note:
•
Even if the remote control is used within its effective operation range (8m), the unit might not
respond to the remote if there are any obstacles between them.
•
The remote control might function incorrectly if it is operated near other products that generate
infrared rays or if other remote control devices that use infrared rays are operated near the unit.
Likewise, the other products might also function incorrectly.
Remote sensor
NE8006HW(SBS-200)_GB_41014751_20140604.indd 9 2014-6-4 16:15:04