DEVA SmartGen 6.0 Maintenance And Operation Instruction Manual Download Page 66

Page: 66 / 102

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 66 -

SETTINGS

General

All general settings are applied through this section. From here you can specify the Site Name

for easy identification of the unit. You can also easily Update the Firmware, Format the Storage or

even to Reboot the device or Restore it to its Factory Defaults.

Site Name

– if changed, the name will be used as a title of the WEB Interface. It will also be

used as an alias for the UPnP and LCD Display.

Pressing the [Factory Defaults] button will return the device to its factory defaults.

Pressing the [Reboot Device] will reboot the device.

Firmware Update contains information of the Current Firmware Version, and also allows the

device’s Firmware to be updated.

The Log Files Maximum Age

is also specified through here.

NOTE

: Log files older than the specified will be permanently deleted.

Summary of Contents for SmartGen 6.0







































































































Search results

Summary of Contents for SmartGen 6.0

Reviews:

DEVA SmartGen 6.0, Maintenance And Operation Instruction Manual, Page: 66 / 102

Search results

Summary of Contents for SmartGen 6.0

Reviews: