Page 9
Deva037 USB Encoder Interface User’s Manual
Software Installation
Ensure the Deva supplied USB stick is plugged into a USB socket on the PC and select the
‘Install Driver’ or ‘Update Driver’ button. When prompted, browse to the USB stick and locate
the folder
‘X:
\
Deva CMM Control Relxx’
(‘X’ and ‘xx’
will vary according to the PC setup and
Deva software release).
Click on ‘Install’ or ‘OK’
and follow the ensuing instructions to complete the installation.
Windows will locate the correct drivers for the device and will indicate when they have been
successfully installed.
3.2.2.1
Software installation and configuration
In order to configure Deva037, it is necessary to install the Deva Tools utility, as follows:
With the USB stick plugged into the host PC, browse to
‘
X:\Deva CMM Control
Relxx\DevaCMMCtrl\Deva Tools\
Setup Deva Tools’
(‘
X
’ will vary according to the PC setup) and
click ‘Next’ or ‘Install’. Follow the instructions to complet
e installation.
The first step on a new installation, after installing Deva Tools, is to use the Deva Config
Editor to install a default configuration for the device. This is performed by opening the Deva
Config Editor, when a display similar to Figure 3.3 will be displayed.
Figure 3.3 Config Editor
–
initial screen
Press the ‘Code’ button and, on the pop
-up displayed, enter the code 0454 in the code dialog,
as shown in Figure 3.4
. Press ‘O
k
’. The main panel will change to a displ
ay similar to