Assembly from crates:
9
>
Fit wheels or tandem axle (optional extra) to the chassis. The narrow track
of the tandem axle has to face the direction of travel.
>
Mount contact rollers (optional extras)
>
Lift rear swath onto chassis,
>
and safeguard it against rolling forwards or backwards.
>
Place cross beam on supports
Mount cross beam
Fit the central cross beam to the rear swath as follows:
>
Push swivel joint onto stub and lock in place.
>
Use lifting gear to lift cross beam out of the crate and position it on two sup-
ports.
>
Unwind cables and hoses from the cross beam
>
Push the swivel joint onto the stub on the cross beam (this side does not
lock)
>
Use hoist to bring the cross beam up to the rear swath assembly,
>
and fasten flange with 4 srews (M16) and nuts. See spare parts list F03
and F04
If an additional guard cloth (optional extra) is to be fitted, its transport at-
tachment is fitted together with the upper screws. See spare parts list G03
Contact roller
Tandem axle
Swivel joint
cables, hoses
Cross beam
