DEUTSCHMANN AUTOMATION SPEEDY Series, Instruction Manual

Page: 14 / 22

SPEEDY switching modes Deutschmann Automation GmbH & Co. KG
14
Instruction manual dynamic switching accelerator SPEEDY V. 3.1 30.1.20
5.3 Switching mode 2
In switching mode 2, input 1 is switched to output 1 and input 2 is switched to output 2. Input 3 is
an Enable input. If there is no signal at input 3, input 1 and input 2 are inoperable. The duration of
the overexcitation pulses is set at input 4.
Picture 3: Switching mode 2
Input 1 Input 2 Input 3 Output 1 Output 2
0 VDC 0 VDC 0 VDC 0 VDC 0 VDC
+24 VDC 0 VDC 0 VDC 0 VDC 0 VDC
0 VDC +24 VDC 0 VDC 0 VDC 0 VDC
+24 VDC +24 VDC 0 VDC 0 VDC 0 VDC
0 VDC 0 VDC +24 VDC 0 VDC 0 VDC
+24 VDC 0 VDC +24 VDC +UB 0 VDC
0 VDC +24 VDC +24 VDC 0V +UB
+24 VDC +24 VDC +24 VDC +UB +UB
Input 4 Pulse
0 VDC 2 ms
+24 VDC 5 ms