5.8G Video Transmission System Instruction Manual V1.0
顶翔智控
E-mail: [email protected] Website: www.dynam-rc.cn
Thank you for purchasing this Detrum product. This is a 5.8GHz wireless transmitter
and receiver kit, which is for synchronous video transmission. It is suitable for first
person view (FPV) use.
Packing List
Package contents in DVT58 box:
DVT58
×
1
DVT58 should be mounted on the
airframe.
Mushroom Antenna (Tx)
×
1
This antenna is used to connect to the
SMA jack of DVT58.
4-pin connector to DuPout connector and
JST connector Cable
×
1
This cable is used to connect DVT58 to
the battery and the camera.
Package contents in DVR58 box:
DVR58
×
1
DVR58 can be mounted on the back of the
transmitter.
Mushroom Antenna (Rx)
×
1
This antenna is used to connect to the SMA
jack of DVR58.
DC3.5mm to DC5mm Cable
×
1
This cable is used to connect DVR58 to the
power connector of the monitoring display.
DC3.5mm to XT60 Cable
×
1
This cable is used to connect DVR58 to the
battery.
3.5mm Stereo Plug to RCA Plug Cable
×
1
This cable is used to connect DVR58 to the
AV connector of the monitoring display.
Product Description
This is a 5.8GHz wireless transmitter and receiver kit with
6
00mW power. DVT58 is
the transmitter and DVR58 is the receiver. There are 48 channels adjustable.
DVT58
CH
button is for frequency channels switching (cyclically from 1 to 8).
FR
button is
for frequency bands switching (cyclically from 1 to 6).
Two digital display: One for
CH
and the other for
FR
.
SMA jack: Connect to the mushroom antenna (Tx).
4-pin (+ - - V) connector: The four pins (from left to right) are the positive and
negative power supply, camera GND and video signal.
DVR58
CH
button is for frequency channels switching (cyclically from 1 to 8).
FR
button is
for frequency bands switching (cyclically from 1 to 6).
Two digital display: One for
CH
and the other for
FR
.
SMA jack: Connect to the mushroom antenna (Rx).
12V OUT: Output power supply (12V/1A), it is connected to the power connector of
the monitoring display.
12V IN: Input power supply, it is connected to the battery.
VIDEO OUT: The video output port, it is connected to the AV connector of the
monitoring display.
Specifications
DVT58 Transmitter Specification
Working Frequency
5.8GHz ISM
Output Power
6
00mW
Channel
48 CH
Input Voltage
DC 7V~17V
Supply Current
300mA/12V
Antenna Connector
50
Ω
SMA
Antenna Gain
2dBi
Video Input Impedance
75
Ω
Video Band Width
8MHz
Video Format
NTSC/PAL
Working Temperature
-40~85
℃
Dimension (L
×
W
×
H)
49.7
×
34.1
×
10.6mm
Weight
16g (without antenna)
DVR58 Receiver Specification
Working Frequency
5.8GHz ISM
Channel
48 CH
Input Voltage
DC 7V~17V
Supply Current
80mA/12V
Output Voltage
12V
Antenna Connector
50
Ω
SMA
Antenna Gain
2dBi
Video Output Impedance
75
Ω
Working Temperature
-40~85
℃
Dimension (L
×
W
×
H)
62.8
×
45
×
14.5mm
Weight
28g (without antenna)
Operation Instructions
Connecting DVT58
1.
Firmly mount DVT58 on the airframe.
2.
Install the transmitting antenna (Tx) on the SMA jack of DVT58 and adjust the
antenna's orientation, Make sure that the antenna radiating surface is unobstructed,
and make sure that its polarization direction is consistent with that of the receiving
antenna (Rx) during flight.
3. Prepare a 4-pin connector to DuPout connector and JST connector Cable. Connect
the 4-pin connector to DVT58, DuPout connector to the camera, and JST connector
to the battery (2~4 Li-Po).
Connecting DVR58
1.
Firmly mount DVR58 on the back of the transmitter.
2.
Install the receiving antenna (Rx) on the SMA jack of DVR58 and adjust the
antenna's orientation, Make sure that the antenna radiating surface is unobstructed,
and make sure that its polarization direction is consistent with that of the
transmitting antenna (Tx) during flight.
3.
Connect the
12V OUT
connector of DVR58 to the power connector of the
monitoring display by using a DC3.5mm to DC5mm cable.
4.
Connect the
VIDEO OUT
connector of DVR58 to the AV connector of the
monitoring display by using a 3.5mm stereo plug to RCA plug cable.
5.
Connect the
12V IN
connector of DVR58 to the battery (2~4S Li-Po) by using a DC
3.5 mm to XT60 cable.
Selecting Frequency
Power on DVT58 and DVR58 for the first time, both of them show "11" on the digital
display, which means the frequency is 5865MHz. User can change the frequency.
DVT58 and DVR58 can store the frequency set last time before power-off. The
following describes the frequency settings.
Precondition: DVT58 and DVR58 are connected correctly.
Setting Method:
1. Power on DVT58, press the
CH
button to change channel, "CH" digital display will
change synchronously, "CH" digital display changes cyclically from 1 to 8. Press
the
FR
button to change frequency band, "FR" digital display will change
synchronously, "FR" digital display changes cyclically from 1 to 6.
2. Change CH and FR values of DVR58 in the same way. Make sure that the DVR58
and DVT58 are at the same frequency.
3. When DVR58 and DVT58 are set at the same frequency, the binding will be
successful. The display will show the video, which indicates the video transmission
system works normally.
Appendix
Channel and frequency table is shown as below.
CH
FR
CH
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
FR
FR1
5865
MHz
5845
MHz
5825
MHz
5805
MHz
5785
MHz
5765
MHz
5745
MHz
5725
MHz
FR2
5733
MHz
5752
MHz
5771
MHz
5790
MHz
5809
MHz
5828
MHz
5847
MHz
5866
MHz
FR3
5705
MHz
5685
MHz
5665
MHz
5645
MHz
5885
MHz
5905
MHz
5925
MHz
5945
MHz
FR4
5740
MHz
5760
MHz
5780
MHz
5800
MHz
5820
MHz
5840
MHz
5860
MHz
5880
MHz
FR5
5658
MHz
5695
MHz
5732
MHz
5769
MHz
5806
MHz
5843
MHz
5882
MHz
5917
MHz
FR6
5362
MHz
5399
MHz
5436
MHz
5473
MHz
5510
MHz
5547
MHz
5584
MHz
5621
MHz
SMA jack
4 pin connector (+ - - V)
CH button
FR button
digital display
SMA jack
CH button
FR button
VIDEO OUT
12V IN
12V OUT
digital display
