Detroit Diesel EPA07, Workshop Manual, Page: 276 / 442

21.2 REMOVAL OF THE OIL PUMP, OIL SUCTION MANIFOLD, AND OIL LINES
21.2 REMOVAL OF THE OIL PUMP, OIL SUCTION MANIFOLD, AND OIL
LINES
Remove as follows:
1. Remove oil drain plug from the oil pan and drain the oil.
2. Remove the oil pan. Refer to section 19.2.
3. Remove the four bolts (2) securing the oil suction manifold (1) to the engine block (3).
4. Remove the oil suction manifold (1), oil lines (6 and 11) and O-rings (5 and 10). Discard
the O-rings.
5. Remove the three bolts (7) securing the oil pump (9) to the engine block (3) and remove
the oil pump assembly (8 and 9) from the engine block.
All information subject to change without notice.
21-4
DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION