EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE
1.4
INSTALLATION OF THE ROCKER COVER
Install as follows:
1. Install rocker cover gasket into groove in rocker cover.
2. Install bolts (1) or stud bolts (2) (if removed) and isolators (3) into rocker cover.
3. Install rocker cover onto camshaft housing.
4. Finger tighten all bolts (1) and stud bolts; then torque to 20 N·m (14 lb·ft).
All information subject to change without notice.
DDC-SVC-MAN-0081 2010
Copyright © 2010 DETROIT DIESEL CORPORATION
1-7
Summary of Contents for EPA07
Page 1: ......
Page 2: ......
Page 287: ...23 OIL FILTER Section Page 23 1 REPLACEMENT OF THE OIL FILTER 23 3 ...