DETEWE OpenPhone 26, User Manual

Page: 74 / 116

Features and Menus The Menus
72
(= external call forwarding, configured by the system admin-
istrator), it can take a few seconds after configuration for call
forwarding to be activated in the exchange.
Divert door
: With this type of call forwarding, all calls signalled by the doorbell
are forwarded. If several doorbells are configured on the communications system,
first select the doorbell whose calls are to be diverted. How many door bells are
available and with which names they are listed in the menu, depends on the type
of entrance intercom. Consult your system administrator if you have questions
concerning the configuration of the door bells. Then key in the call forwarding
destination (please refer to the chapter entitled
Making External/Internal Calls
starting on page 38). Activate call forwarding with
On
. Active call forwarding is
indicated by a “+” sign. This is followed by the call forwarding destination.
Remote divert
: This function allows you to configure call forwarding for the
phone numbers of other OpenCom 100 users. In order to do so, “Call forwarding
for other user” authorisation is required, otherwise this menu item will not be dis-
played. Also, you can configure call forwarding only for those users whose terminal
has not been blocked for this type of access (these users will themselves have
authorisation to “Prevent call forwarding by other user”).
Enter the internal phone number for which you want calls to be forwarded. The
rest of the procedure is identical with the one for configuring call forwarding for
your own telephone (see page 71).
Follow me
: This type of call forwarding is configured on a destination telephone
to which calls for an original (source) telephone are forwarded. The PIN of the
source telephone is required for this function. If the “follow me” function is active,
all telephone numbers of the other telephone are forwarded
immediately (with
the exception of hunt group numbers).
As the
Source
, enter the internal telephone number for which calls are to be for-
warded from the source telephone to the destination telephone. Then enter the
PIN
of the source. Activate the follow me function with
On
option.
To deactivate the follow me function, select the
Off
option on your own tele-
phone or on the other telephone (source). Alternatively, on the other telephone
(source), you can deactivate the “follow me” function by switching off the function
“Divert call immediately”.