Detcon CXT-IR, Operator'S Installation And Instruction Manual

Page: 37 / 52

Model CXT-IR
CXT-IR Instruction Manual Rev. 2.1 Page 33 of 48
Offset Name R/W Comment
8203 Control R/W Wireless Control
8204 Status R Wireless Status
8205 Input Voltage R Smart Battery voltage or Input Voltage to A/D
8206 Battery Error Count R/W Smart Battery read error count if detected
8207 Reserved --
8208 Timestamp[0] R Time since power applied -- Seconds High
8209 Timestamp[1] R Time since power applied -- Seconds Low
8210 Timestamp[2] R Time since power applied -- Milliseconds
4.2.1 CXT Sensor Registers
4.2.1.1 Sensor Faults – Register 0005
The sensor fault status register consists of High and Low Status Bits. These bits are set/reset as faults occur or
are cleared. Each bit has a particular meaning:
Register #
High Byte Low Byte
0005 Status Bits Status Bits
Bits read as 0 are FALSE; bits read as 1 are TRUE
Status Bits High Byte:
Bit 15 – Reserved
Bit 14 – Calibration Mode
Bit 13 – Reserved
Bit 12 – Zero Fault
Bit 11 – Range Fault
Bit 10 – Reserved
Bit 9
– Clearing Fault
Bit 8 – Reserved
Status Bits Low Byte:
Bit 7 – Sensor Fault
Bit 6
– Processor Fault
Bit 5 – Memory Fault
Bit 4 – Reserved
Bit 3 – Reserved
Bit 2 – Temperature Fault
Bit 1 – Auto Span Fault
Bit 0
– Global Fault