25
Using the spiral attachment
You can use the spiral attachment [D] with the
curling iron [A]:
•
Check whether the curling iron [A] has cooled
down.
•
Push the spiral attachment [D] with the grooves
on the attachment upwards to the centre onto
the closed, cold curling tongs [A].
•
Press the lever of the curling iron to open the
curling tong.
•
Carefully push on the spiral attachment [D] onto
the cold curling iron [A] as far as it will go.
•
Close the curling tong.
•
Divide your hair into individual strands. Hold the
strands taut.
•
Press the lever of the curling iron [A] to open the
curling tong.
•
Place the hair strand ends between the barrel
and the curling tong of the curling iron [A].
•
Close the curling tong to hold the hair strands in
place.
•
Wind the strands toward your head around the
spiral attachment [D]. Always ensure that the hair
strands are wound up as shown in the figure.
•
Wait for about 10 seconds before you unwind the
hair strands again.
•
Open the curling tong and pull the hair strands
out of the curling tong.
Using the straightening iron
•
Attach the straightening/crimping attachment [12]
to the multi-function styler.
Straighten
Closed
Crimp
•
Slide the selector switch [11] into the „Straighten“
position [a]. Now the straightening iron [G] can be
used.
Summary of Contents for HC 40
Page 47: ...47...
