6159922280_02
8 / 12
01/2017
English
INSTALLATION
● See page 3.
● If required, use a VESA 100mm x 100 mm
mounting support to install the equipment on
the wall/panel/stand. In that case, cover the
panel mount openings on the chassis with the
supplied hole blocks to prevent dust invasion.
● Connect the delivered power adaptor
(140/240VAC) to power the panel PC.
A
REAR TOP
1 Panel mounting openings
2 Antenna holes
3 CFast card (optional)
4 Backlight on/off
5 Increase (left)/decrease (right) brightness
6 Power switch
B
REAR BOTTOM
1
Line-in
to connect an audio device
as sound source
2
Mic-in
to connect an external
microphone
3
Line-out
to connect a headphone or
a speaker
4
LAN 1 /
LAN 2
to connect the system to a
local area network
5
USB
to connect USB 2.0/1.1
devices
6
COM 1
to connect
RS232 /
422 / 485
compatible
series
devices
supports 5 V
7
COM 2
supports
12 V
8
PS/2 KB/MS to connect a keyboard and
a mouse
Reset button to restart the system
9
VGA
to connect an analog VGA
monitor
10 12V-30V DC
input
to plug the DC power cord
C
REAR VIEW
1 DIO
4 digital input (source type
4 digital output (sink type)
2 GPIO
2 digital input
2 digital output
3 COM3
to connect
RS232
compatible
series devices
supports 5 V
4 COM4
supports 12 V
MAINTENANCE INSTRUCTIONS
Maintenance should be performed by qualified
personnel only.
According to Directive 2012/19/
CE concerning Waste Electrical and
Electronic Equipment (WEEE), this
product must be recycled.
● Contact your Desoutter
representative or consult the website
"www. desouttertools.com" to find out
where you can recycle this product.
● Contact your local Desoutter
representative for support.
