TRANSPORTATION, PREVENTATION AND TEMPORARY STORAGE
DESMI Pumping Technology A/S
Tagholm 1
9400 Nørresundby
– Denmark
Tlf. nr.: +45 96 32 81 11
Fax +45 98 17 54 99
17
E-mail: [email protected] www.desmi.com
3.
TRANSPORTATION, PREVENTATION AND TEMPORARY
STORAGE
3.1. Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and notify DESMI or
the supplying dealer (as applicable) and the insurer about the damage in writing immediately.
3.2. Transport
.
DANGER
FALLING OBJECT HAZARD!
The pump (set) could slip out of the suspension arrangement, which will cause death or
serious injury
Always transport the pump (set) in the specified position.
Do not attach the suspension arrangement to the free shaft end or the motor eyebolt.
Monitor the weight data and the centre of gravity.
Obey the applicable local health and safety regulations.
Use suitable, permitted lifting accessories, for example, self-tightening lifting tongs.
CAUTION
RISK OF DAMAGING TO THE SHAFT SEAL!
Transport the pump incorrectly could cause damage to the shaft seal!
To transport the pump / pump set from the lifting, tackle as shown below.
Before shipment, fasten the pump securely on pallets or the like.
The weights of the pumps are given in
chapter 4.5
. The weight of the motor is given in motor
operation manual. It can be found in
- Shipping documents together with the cargo
- Shipping mark on cargo box
- Other documents for the shipment, contracts or orders, etc.
Summary of Contents for NSL 100-215
Page 2: ......
