GENERAL DESCRIPTION
DESMI Pumping Technology A/S
Tagholm 1
9400 Nørresundby
– Denmark
Tlf. nr.: +45 96 32 81 11
Fax +45 98 17 54 99
9
E-mail: [email protected] www.desmi.com
NOTE: Max. allowed liquid temperature is 80°C for fresh water and most likely less for other
liquids. The pump housing can be fitted with a temperature sensor to be connected to the
electrical control system on site and then set this to trip the drive power 10°C above normal
operating temperature. Contact DESMI in case of doubt about max. allowed liquid temperature.
Nørresundby, August 25 2022
Henrik Mørkholt Sørensen
Managing Director
DESMI Pumping Technology A/S
Tagholm 1, 9400 Nørresundby
1.5. Information
relevant
for
disassembly
or
disposal
at
end-of-life
No harmful materials are used in DESMI pumps
– please refer to DESMI Green Passport (can be
sent on request
– contact a DESMI sales office) – i.e. common recycling companies can handle
the disposal at end-of-life. Alternatively the pump and motor can be returned to DESMI at end-of-
life for safe recycling.
Summary of Contents for NSL 100-215
Page 2: ......
