Global Payments FLEX POS –
Semi-Integrated Desk/5000
Quick start guide
Welcome to your Global Payments FLEX POS – Semi-Integrated solution.
This quick start guide is designed to
help you quickly get started with your semi-integrated payment solution. If this is your first setup, please contact
your Point-of-Sale (POS) or Electronic-Cash-Register (ECR) system provider to start.
Terminal ON/OFF
When the terminal is connected to the power supply, it will automatically
power up, initiate an application check and then enter the home screen.
Simply disconnect the power supply from the electrical outlet to power
off the device.
Power connection
Ensure your power supply comes from a surge protector connected to
your electrical outlet.
For an IP connection power setup
– Plug the power cable into the power
port located at the edge of the ethernet cable connector.
For an RS232 connection power setup
– Plug the power cable into the
power port on the adaptor/magic box
Network connection
For an IP connection power setup
– Plug the end of the ethernet
connection cable into the device’s ethernet port
For an RS232 connection power setup
– Plug the one end of the
ethernet connection cable into the adaptor/magicbox
Administrator password
Contact the Global Payments Customer Care Centre at
1-800-599-6491
to set up your personalized admin password.
You will
need
to change your password once the terminal has been
installed.
Global Payments and the Global Payments logo are trademarks of Global Payments Inc. and may not be
copied, imitated, or used, in whole or in part, without prior written consent. Desjardins is a trademark of the
Fédération des caisses Desjardins du Québec used under licence.
© 2022 Global Payments Inc. All Rights Reserved.
1
