background image

This Manual is applicable to the following products  

 

Revised March 29th 2012 

LD 300 starting from S.N. ____ 

Pag 1

.

 
 
 
 
 
 

 

LED MAGIS 40 W

 Daylight Balanced CCT 

LED Fresnel SPOTLIGHT 

(white light, Daylight balanced Correlated Color Temperature)

 

 

INSTRUCTION MANUAL  

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

MANUFACTURER 

REPRESENTATIVE 

 

ILT Italy S.r.l. 

Via Cancelliera # 10a, 00041 Albano Laziale (Rome- Italy). 

Tel. +39/06/902901 Fax. +39/06/90231051 

U.R.L.: 

www.desisti.it

        E-mail: 

[email protected]

 

 

 

 

1. INTRODUCTION 

 
Congratulations on your purchase of a LED MAGIS 40W lighting fixture with Daylight Balanced CCT LED. 
Our commitment to Total Customer Satisfaction and our consolidated experience and leadership in design 
innovation and manufacturing of lighting products for the professional Entertainment Industry means you can 
depend upon the quality of this product. 

 

The LED MAGIS 40W is a compact, highly efficient Fresnel lens spotlight using a LED ARRAY combined 
with the DE SISTI Patented optical system to optimize the photometric performances of LED ARRAYS when 
utilized in combination with either Fresnels or Plano Convex lenses.  

 

The Lighting Fixture is DMX Controlled and includes a number of parameters that can be set locally, it is 
equipped with a universal voltage power supply for AC feed and it is available with Daylight Balanced CCT.  

 

It utilizes Standard accessories from the DE SISTI range of equivalent Fresnel Lens size, such as Barndoor, 
Colour Frame, Cones, scrims. 

LD300.150 

Daylight CCT 

Manual Operated

Summary of Contents for LED MAGIS 40W







Reviews: