36
SETTING THE TILT-IN-SPACE ANGLE
The tilt-in-space angle describes how much
the seat and back are tilted, and is set by the
height of the holes that the seat fits into in
the metal grid.
To set the seat at 0° with no tilt-in-space,
position the seat in highest set of holes in
the chosen seat depth colour. Use the lowest holes to set the seat
at the largest tilt-in-space angle of 15°.
Fig. 36 Adjusting the Seating
SETTING THE BACKREST UPRIGHT OR IN A SLIGHT RECLINE
If you use the front row of holes in a coloured slot, the backrest
position will be an upright 90°.
If you use the back row of holes the backrest position will have a
slight recline of 97° compared with the seat
SETTING THE HEADREST HEIGHT
To adjust the headrest height, hold the
headrest and turn the hand screw anti-
clockwise. Gently move the headrest up or
down then turn the hand screw clockwise to
tighten it.
Fig. 35 Seat Position Grid
Wizzybug in an
upright position
with no tilt-in-
space
Seat is upright
but tilted in
space 0 to 15°
Fig. 37 Adjusting the
Headrest Height
