hs36 - 36" OUtdOOr Fireplace hOOd
hs42 - 42" OUtdOOr Fireplace hOOd
1. Remove protective film from stainless hood.
2. Align three notches located on back side of hood with front face of fireplace (see Figure). Notches should be at least 2" up
from edge of fireplace opening.
3. Hold fireplace hood in place. Using a #34 (0.11 dia.) drill bit, drill through 3 notches.
4. Insert 3 screws through notches in hood into holes in fireplace.
OUtdOOr Fireplace hOOd
iNstallatiON iNstrUctiONs
Figure - Installing Hood
Notches
on Hood
Screws
121311 01
121311-01
Rev. A
03/07
2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004
www.desatech.com
NOT A UPC
