background image

For more information, visit www.desatech.com

WARNING: If the information in this manual is not fol-

lowed exactly, a fire or explosion may result causing 
property damage, personal injury or loss of life.

—  Do  not  store  or  use  gasoline  or  other  flammable 

vapors and liquids in the vicinity of this or any other 

appliance.

—  WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do not use any 

phone in your building.

•  Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

•  If you cannot reach your gas supplier, call the fire 

department.

—  Installation and service must be performed by a quali

-

fied installer, service agency or the gas supplier.

INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.

ROYAL ENGLISH OAK AND WINcHEStER OAK UNVENtED 

(VENt-FREE) GAS LOG HEAtER  

OWNER’S OPERAtION AND INStALLAtION MANUAL

Patent Pending

Variable Manually-Controlled Models Also Design-Certified as

 

Vented Decorative Appliances

18" AND 24" VARIAbLE MANUALLY-cONtROLLED MODELS

cGS2718PA, cGS2718NA, cGS3124PA, cGS3124NA

SGS3124PA, SGS3124NA

18" AND 24" tHERMOStAtIcALLY-cONtROLLED MODELS

cLD3018PtA, cLD3018NtA cLD3924Ptb, cLD3924Ntb

Summary of Contents for CGS2718NA





































Reviews: