Setting IP addresses of the counting modules
HydraIP APC-R module
Version: 1.2.0
Datum: 23.11.2017
Seite: 16
5
Setting IP addresses of the counting
modules
If you connect the 14pin connector and M12 connector the counter will automatically have the default IP
address: 192.168.100.10.
The IP addresses need to be set manually for every counting module. You can select an IP address by
connecting a pair of Coding pins of the 14pin Connector plug.
e.g. Connect pin 9+10 (= Coding PIN 0) to select IP address 192.168.10.1
Backside of the 14pin male connector
Connect pin 7+8 (=Coding PIN 1) to select IP address 192.168.10.2 for door 2
