Denver WCT-3004 Instruction Manual Download Page 13

e)  Press OK switch to save the current setting, then press MENU to return to info 

display. 

4.1.16 Set Timer 

This parameter defines a certain camera working time in a day. In the rest of the 

time the device is shut off. The effective value of the hour ranges from 0 to 23 

while the minute ranges from 0 to 59. 
Provided that the camera should work from eight a.m. to five p.m., the steps are 

as follows: 
a)  Press MENU to display the setting menu. 
b)  Press RIGHT and DOWN until to select Timer. 
c)  Press OK to select item, press UP or DOWN to change the value until the start 

time changes to 8 and the stop time changes to 17. 

d)  Press OK switch to save the current setting, then press MENU to return to info 

display. 

4.1.17 Enter Password 

If the password setting is selected as On, after switching on the camera, the LCD 

screen on camera will prompt to enter password. The default password is off. It 

can be changed where the steps are as following: 
a)  Press MENU to display the setting menu. 
b)  Press DOWN to select Password. 
c)  Press Up to select On, then press Right to select 4 numbers as password. 
d)  Press OK to save the current setting, then press MENU to return to info 

display. 

e)  The LCD screen will prompt to enter password next time you switch on the 

camera. 

Press MENU to cancel setting and return to previous menu. 

4.2 Playback 

In playback mode, images or videos can be viewed, deleted. The images and 

videos can be viewed on: LCD screen on camera and TV monitor which connect 

to camera with TV cable. For simplicity, operations with PC won’t be introduced 

here. 

4.2.1  Viewing Photo or Video 

a)  Switch to TEST mode and enter into info display. 
b)  Press right the select switch to view the latest picture (or video) in LCD screen 

on camera, TV monitor or Image viewer with TV-in connector. 

c)  Press Left to start playing the video when viewing. 
d)  Press Left again to stop playing the video. 
e)  Press UP to view the previous picture (or video) and DOWN for the next. 
f)  Press down the select switch to return to info display. 
When viewing images, the total number of all images in the SD-card and the index 

of the displaying image will be shown respectively. 

4.2.2  Delete Photo or Video 

The operations are as following: 
a)  Press Right to display Photos and Videos. 

ENG-13 

Summary of Contents for WCT-3004

















Reviews: