Denver MCA-54, Instruction Manual

Page: 5 / 79

GB-4
g
REMOTE CONTROL
1. POWER BUTTON
2. CD RANDOM BUTTON
3. CD REPEAT BUTTON
4. MUTE BUTTON
5. CD STOP BUTTON
6. CD PLAY/PAUSE BUTTON
7. CD SKIP / REV. BUTTON
8. CD SKIP / FF. BUTTON
9. VOLUME DOWN BUTTON
10. VOLUME UP BUTTON
g
INSERTING BATTERIES IN THE
REMOTE CONTROL UNIT
Press on the cover of the battery compartment and
slide it down to open the compartment.
Insert two AAA (or UM4 or LR03) size batteries into the
remote control, matching the polarity marks ("+" and
"-") contained in the battery compartment and on the
batteries themselves. Put the cover back onto the
battery compartment, press it lightly and push it
upwards until it snaps into place.
NOTES: Replace all the batteries at the same time.
Take the batteries out of the remote control if it is to
remain unused for a prolonged period. Do not mix dry
cells with rechargeable batteries. When the batteries
become weak, the remote control no longer functions
normally. If this occurs, remove the batteries and
replace them by new ones.
IMPORTANT: When replacing batteries, or disposing of
the applianc e, be sure to follow current regulations
relating to their disposal. Please place in a specially assigned location to ensure that they are disposed of
safely in accordance with environmental protection requirements
g
SETUP BEFORE USE
1. Connecting the speakers
Unreel the SPEAKER CABLES and connect them to the SPEAKER OUTPUT TERMINALS. Connect the
black wires to the black terminals. Connect the black and grey wires to the red terminals.
2.
Connecting the power cord
Before use, plug the AC power cord into a mains outlet and then set the unit's main power switch to ON.
1
2
3
4
5
6
7
8
9
10
** BATTERIES NOT INCLUDED **