GB-10
6.5.1 DOWNMIX
Use the Up and Down arrow button to move the scroll and adjust the saturation.
LT / RT: Choose this setting, it will be sound like in a movie theatre if the original movie the disc was recorded
from was encoded in the Pro Logic Dolby Digital format.
STEREO: when 2-channel sound playing, stereo signal will be output.
VSS: Choose this setting, when a disc recorded with 5.1-channel sound format playing, the
fictitious surround soundtracks effect will be heard from the main soundtrack.
6.6 DIGITAL SETUP
The video setup options are illustrated below:
6.6.1 OP MODE
LINE OUT: Choose this setting to line out the input signal. It will be more suitable for playing in the night time,
for the output volume is low.
RF REMOD: It will be more suitable to choose this setting for playing in the day time, for the
output volume is high.
6.6.2 DYNAMIC RANGE:
When
“
LINE OUT
”
is selected, choose this setting to adjust the line out ratio and get
different effect. If adjusting to FULL, the audio signal peak value will be the minimum; while adjusting to OFF,
maximum.
NOTE: This option will be validated when the DOWNMIX OFF.
8.6.3 DUAL MONO (LEFT + RIGHT)
Choose this option to setup the L and R mono output mode; There are four modes in this option: STEREO,
MONO L, MONO R, and MIX MONO.
7. Specification
Signal system
PAL/AUTO/NTSC
Frequency Response
20HZ-20KHZ( at 1KHz 0 dB)
Signal-to-Noisy Ratio
≥
90 dB( at 1KHz 0 dB)
Audio DisNoise
≤
-60dB ( at 1KHz0dB)
Audio Output(Analog audio)
2.0
+0
-1.0
Vrms
Video Output
Composite:1.0
±
0.2Vp-p
Load impedance: 75
Ω
, imbalance, negative polarity
MAX Resolution
>500 lines
Power Supply
~110-240V/50~60Hz into 5V
Dimensions
245(mm)X178(mm)X43(mm)
Supported Disc
MPEG-4/Xvid/DVD/SVCD/VCD/CD/MP3/Kodak Picture/Photo CD
USB
2.0
REFERENCE:
To protect your DVD player, the interval between two consecutive Power button operations must be above 30
seconds.
No using for a period of time, please pull out the plug from the electronic outlet.
The player should be operated only on condition that the type of power supply corresponds to the marking
label. Otherwise, it doesn
’
t work or even be damaged.
The player may not be compatible with some encrypted discs.
If the player stops playback by accident, please power it on again.