7 Preparation Mode
Page 21
7
Preparation Mode
Preparation Mode Operations
Preparation Mode (PREP) allows the user to regulate the motor speed, direction, and light source (on/off) of
the handpiece system.
The Midwest
®
E provides 4 default Memory Settings
for ratio and speed (for details see the default values’
table for ratio and speed in Table 1 below).
To individually change these settings simply "overwrite" them as described below. This allows one to compile
their own preferences to fit their option needs.
Preparation Mode
PREP Mode Icon
SPEED Icon
HANDPIECE LIGHT Icon
DIRECTION OF ROTATION Icons
GEAR RATIO Icon
PREP MODE MEMORY SETTING
Icons
(+/-) Parameter Icons
Figure 9
– Preparation Mode Menu Screen
Table 1
– PREP Mode Factory Settings
Key
Ratio / reduction rate
Speed
Light
P1
1 : 5
200,000 rpm
on
P2
1 : 1
40,000 rpm
on
P3
5 : 1
8,000 rpm
on
P4
1 : 1
20,000 rpm
on
PREP Mode allows each user to change the following settings:
Gear Ratio
Rotary Speed
Direction of rotation (clockwise or counter-clockwise)
Light on / off
To Change PREP Mode Memory Settings:
1. Turn on the device.
2. Press PREP to access the Preparation Mode presets.
3. Press "P1", "P2", "P3," or "P4" icon to view and edit the settings
(when activated the background becomes highlighted).