Dentsply Sirona
Operating Instructions Xios AE Sensor USB interface and sensors
7 Resend exposures
7.3 Export images in Rescue mode (alternate)
67 29 433 D3780
D3780.201.01.01.02 09.2019
71
7.3
Export images in Rescue mode (alternate)
To rescue unsaved images by exporting them, please perform the
following steps:
ü
This procedure is an alternate approach to rescue images if you are
unable to resend them using the recommended procedure.
1.
Click on Sidexis 4 Sensor Configuration.
2.
Click
"Devices"at the Sidexis 4 Sensor Configuration page.
3.
Select the device in Rescue mode. If several devices are
connected, choose the one in Rescue Mode from the drop down
list.
4.
The Exposure Information area provides the number of unsaved
images and patient-related information. Click
"Export Images".
5.
Click
Save As to save a zip file of unsaved images to a known
location on the workstation
6.
Browse for the zip file, select it, and extract the contents.
IMPORTANT
Before importing images into Sidexis, check the patient information
box located in the phase bar area. This is the patient to whom the
imported images will be assigned.
7.
In Sidexis, in the Exposure phase, click
File Import and browse for
the images just extracted.
8.
Select the images and click
Open.
9.
The File Information table will list the selected images and their
status. Click
Import.
Ä
The File Information table will list the selected images and their
status.
10. Click Import.
Ä
The images will open in the
"Light Box". They will also be
available in the
"Timeline" for that patient.
11. On the Sidexis 4 Sensor Configuration page, click
"Finish". If you
have not attempted successfully to rescue images by resending
them, which is the recommended approach, this is an opportunity to
do so. Otherwise, click
OK to conclude the rescue procedure.
Ä
The
"Status" will now indicate that the system is ready and no
additional recovery steps are needed.
Ä
In Sidexis, on the device selection screen, the Rescue icon is
removed.
