3 System description
3.4 USB hub (optional)
Dentsply Sirona
Operating Instructions Xios AE Sensor USB interface and sensors
20
67 29 433 D3780
D3780.201.01.01.02 09.2019
3.4
USB hub (optional)
The AE Sensor USB interface can be connected to the USB port of a
PC either directly or via an active USB hub. An active USB hub is only
required if there is inadequate power supply via the USB port of the PC.
The USB hub is not included in the scope of supply. It must meet the
following requirements:
Type of protection
against electric shock:
Protection class II
USB standard:
2.0 and 3.0
Power supply:
Separate power supply (not bus-powered!)
Safety:
The USB hub must comply with standard
IEC 62368-1 or be certified by a testing
laboratory which requires compliance with
this standard (e.g. VDE, UL, CSA)
3.5
Sensors
Xios AE sensors are available in three sizes (0, 1 and 2).
By using Xios AE sensors enhanced image processing functions are
available to you in Sidexis 4 through special filters. Depending on the
indication you can apply the corresponding filter to the X-ray image in
order to amplify the relevant structures. Information regarding the filters
can be found in this document.
