Dentsply Sirona
Operating Instructions Xios AE Sensor USB interface and sensors
2 Safety instructions
2.10 Additional instructions
67 29 433 D3780
D3780.201.01.01.02 09.2019
15
carpeted areas or low-humidity environments. During cable
replacement, when sensor contacts are exposed, it is especially
important to protect the device from potential ESD damage. Touching a
metal surface prior to replacing the cable will reduce the risk of
damaging sensor components by accidental static discharge. Using
anti-static floor mats or floor treatments (for example Staticide
2005/2002) will also help eliminate static build-up in your office.
2.10.9
Wait for Appropriate Prompts before Operating X-ray
Source
To avoid exposing the patient to unnecessary X-rays, ensure that the
viewbox is flashing green (default color) before triggering the X-ray
Source.
2.10.10
Always Use Sheaths with Sensors
Use Dentsply Sirona sheaths every time the sensor is used. Never use
the sensor without a protective sheath. Never use a damaged sheath.
Always dispose of the sheath after every patient. Protective sheaths are
single-use items and must not be reused under any circumstance.
Reuse of single-use items/instruments may cause them to become
contaminated, compromise their intended function, and result in patient
and user infection, injury and/or illness.
2.10.11
Take Appropriate Precautions during X-ray Operation
Always observe the safety guidelines and precautions supplied with
your X-ray generator and by local regulatory authorities.
2.10.12
Product Manuals from Dentsply Sirona
The contents of this manual are subject to change without prior notice.
For the latest version of this user guide and other product information,
please visit our website at www.denstplysirona.com.
2.10.13
Product Damage during Shipment
All Dentsply Sirona products are carefully inspected prior to shipment.
Upon receipt of a delivery from us, please check the package and note
any signs of visible damage. Do not use products that indicate improper
handling or potential damage. If you suspect an item was damaged,
please contact our Support department for more information.
2.10.14
Use Only Approved Disinfectants
Use only approved disinfectants with Dentsply Sirona intraoral sensors
and their USB, WiFi, and Ethernet interfaces.
Using unapproved disinfectants can produce issues with the physical
appearance of the product and potentially its operation. These issues
include discoloration of product surfaces, loss of legibility on product
labels, cracking or chipping of enclosures, or exposure of internal
components to disinfecting solution.
