Dentsply Sirona
Operating Instructions SiroLaser Blue
3 System description
3.4 Technical Data
66 56 842 D3648
D3648.201.03.02.02 10.2018
21
3.4
Technical Data
General
Beam guide:
Flexible quartz glass fiber
Display:
Full color, graphical LCD touch screen
Cooling:
Internal air cooling controlled by output
Temperature switch:
Software temperature switch at 48° C
Door contact connec-
tion:
Potential-free contact 5 VDC/20 mA (TTL)
Dimensions (W x L x H):
~ 182 x 197 x 189 mm
Weight:
~ 1300 g (incl. handpiece and recharge-
able battery)
SiroLaser Blue specification
Laser type:
Diode laser
Wavelengths & optical
power:
445 ± 5 nm / approx. 0.2 - 3.0 W (CW)
970 -10/+15 nm / approx. 0.2 - 2.0 W (CW)
660 ± 5 nm / approx. 25, 50, 100 mW
(CW)
Laser system:
445 & 970 nm: Class IV
660 nm: Class I
(according to IEC 60825-1)
Device classification:
Class IIb (according to Council Directive
93/42/EEC)
Emission modes:
CW (continuous wave),
chopped 1 Hz to 10 kHz
Pulse:
Repeated pulse
Pulse duration:
Chopped mode: 10 µs - 0.99 sec.
IP degree of protection:
Laser unit: IP20; wireless foot control:
IPX5 (according to EN IEC 60601-1)
Aiming beam:
660 ± 5 nm, max. 1 mW
NOHD:
From the distal end of the optical fiber:
1.5 m
Optical fiber thickness:
200 and 320 µm (single-use fiber tips)
4 and 8 mm (glass rods)
Operation:
Electrical wireless foot control or finger
switch, with electronic access key
Nominal power input:
15 V DC 6.66 A max. 100 VA
MPU101-106
Insulation class:
Class I, type B (according to IEC 60601-1)
Warning: To avoid the risk of electric
shock, this equipment must only be con-
nected to a supply mains with protective
earth.
