2 Safety
1.6 Requirements
Dentsply Sirona
Instructions for Use SiroCam UAF Plus
8
66 90 643 D3762
D3762.201.01.03.02 04.2021
2
Safety
Check the Camera before Using It
There are no customer-serviceable components in the camera.
However, before each usage, check the outer surface of the camera for
any signs of physical damage or defect. The surface of the camera
should have a smooth finish, with no evidence of chipping or damage to
either the handpiece housing or the lens section. If detected, contact
your local distributor of Denstply Sirona products for further instructions.
Always Use Sheaths
Use protective camera sheaths every time the camera is used. Never
use the intraoral camera without a protective sheath. Never use a
damaged sheath. Always dispose of the sheath after every patient.
Protective sheaths are single-use items and must not be reused under
any circumstance. Reuse of single-use devices/instruments may cause
them to become contaminated, compromise their intended function, and
result in patient and user infection, injury and/or illness.
Operate the Camera as Directed
Always use the camera in accordance with the directions and
recommendations contained in this guide and other accompanying or
referenced documentation. Do not attempt to modify the camera or use
it in system configurations not specified in this or other product
documents.
Only Dentists or Authorized Designees Are Permitted to Operate the
System
To ensure the correct use of the camera in a clinical environment, for
purposes that correspond to its intended design and application, only
dentists, or their designees, are authorized to operate the device.
Ensure Proper Camera and PC Workstation Installation and
Operation
The camera has been determined to be in accordance with international
safety standards and is deemed suitable for use within the patient area,
which extends from the patient for a distance of 1.5m. To comply with
these standards, do not operate non-medical equipment (such as a PC
workstation) inside the patient area. Outside the patient area, the
presence of approved non-medical grade equipment and Listed /
Approved / IEC 60950-1 certified Information Technology Equipment
(ITE) computer equipment is acceptable.
The host computer (PC workstation) should be CE-approved and
conform with the Low Voltage 73/23/EC and EMC Directive 89/336/
ERC. Also, to help ensure optimal performance, ensure that all software
programs residing on the workstation are virus-free and have been
adequately tested so they will not impact imaging applications after
installation.
Summary of Contents for SiroCam AF
Page 35: ......
