Dentsply Sirona SINIUS, Service Manual

Page: 45 / 178

63 69 149 D3561
D3561
.
076.01.07
.
02 02.2017
42
Dentsply Sirona 5 Important information
Service Manual Sinius / Sinius CS / Sinius TS 5.9 Acoustic feedback from the treatment center
båÖäáëÜ
5.9
Acoustic feedback from the treatment center
If several problems occur simultaneously, the alarm with the highest
priority will always sound. The alarm with the lower priority will only sound
automatically once this problem has been eliminated.
"y" = 50ms beep
"x" = 250ms beep
„-“ = 250ms pause
Acoustic feedback from the
water unit
Priority Cause
xx--xx--xx--xx--xx--xx….. 1 Amalgam centrifuge error
xxxxxxxxxxxxxxxxx….. 2 Amalgam container is full
xxxx----xxxx----xxxx….. 2 Sanitation / no flow
xx--xx--xx--xx--xx 2 Sanitation / no water sterilizing
agent
xx--xx--xx--xx--xx 2 Sepa sensor DS30 reports a
fault
xx--xx--xx--xx--xx 2 Chair movement remains
blocked
xx--xx--xx--xx--xx 2 Store away instruments
(sanitation)
xx--xx 3 CH emergency (EMR) stop
xx--xx 3 Sanitation or purge completed
xx--xx 3 Power supply overload
determined when booting. BHP
switches itself off
independently.
x-x 3 Electric motor torque threshold
reached
x-x-x-x-x-x 4 Instrument motor
counterclockwise rotation
xxxx 4 Critical instrument lighting
voltage AE
xxxx 4 Instrument/CH programming
confirmation
xxxx 4 Switching off the TU
xxxxxxxx 4 Saving a therapy workflow step
(Endo, Implant)
xxxxxxxx 4 Deleting a treatment workflow
step (endo)
xxxxxxxx 4 Deleting a user-defined endo
treatment