Dentsply Sirona inEos X5, Operating Instructions Manual

Page: 45 / 56

Dentsply Sirona
Operating Instructions inEos X5 9 Performing 3D acquisition
9.4 Free scans
64 17 096 D3586
D3586.201.01.11.02 07.2018
45
9.4.3 Taking a free scan (without previous automatic scans)
1. Align the model.
Ä
The model is aligned horizontally.
Ä
As many teeth as possible are visible in the live image.
2. Let the model rest and wait until the autofocus has focused the
model.
3.
Start the acquisition process with automatic or manual release
Ä
A scan is generated.
4. Add additional scans from adjacent areas: Move the model freely in
the working area until you have reached the next acquisition
position. As soon as the model stops moving, the camera is
automatically released or is manually released by a double-click on
the Start button. You can tilt the model on the shifting plate by up to
40°.
NOTE! The new image must overlap approximately 30-50% of the
previous image.
5.
Repeat step 4 until all of the required scans have been taken.
9.4.4 Taking a free detail scan
1.
Align the model.
Ä The areas in which information is missing in the digital model
preview can be seen in the live image.
2. Let the model rest and wait until the autofocus has focused the
model.
3. Start the acquisition process with automatic or manual release
Ä
A scan is generated.
4. Add additional scans from adjacent areas: Move the model freely in
the working area until you have reached the next acquisition
position. As soon as the model stops moving, the camera is
automatically released or is manually released by a double-click on
the Start button. You can tilt the model on the shifting plate by up to
40°.
NOTE! The new image must overlap approximately 30-50% of the
previous image.
5. Repeat step 4 until all of the required scans have been taken.