Dentsply Sirona
Operating Instructions inEos X5
9 Performing 3D acquisition
9.4 Free scans
64 17 096 D3586
D3586.201.01.11.02 07.2018
43
9.4
Free scans
In the
"Capture Free" mode, you can capture the model situation fast,
manually and in a controlled manner for simple tasks.
Moreover, you can scan e.g. areas that may not be sufficiently captured
in the automatic mode with detail scans.
● For simple tasks
● For detail scans under various angles
9.4.1
Preparing the optical impression
ü
You have selected the desired image catalog (lower jaw, upper jaw
etc.).
Tip: Take special care to select the right image catalog for detail
scans.
1.
Fasten the model to the supplied model holding plate with Blue
Tack. The labial side must face the straight edge of the plate.
or
➢ Alternatively, you can use the parallel vise provided. In this case,
the labial side faces the fastening screw.
2.
Position the model holding plate used with the spherical model
holder.
3.
Select the
"Capture Free" button in the Scan menu.
Ä
The articulating arm moves to its parking position.
Ä
A section of the scan area appears in the live image.
Ä
Green crosshairs appear in the live image.
Summary of Contents for inEos X5
Page 1: ...New as of 07 2018 inEos X5 Operating Instructions English...
Page 55: ......
