5 Installation and startup
5.4 Commissioning
Dentsply Sirona
Operating Instructions CEREC Primemill
24
67 19 681 D3439
D3439.201.01.01.02 09.2019
5.4.3
Touch display description
In these Operating Instructions, operation is described in such a manner
that you can execute and confirm commands via your PC or the touch
display, such as
"Start", "Stop", "Cancel" or "OK". Other possible
commands also have buttons on the touch display.
5.4.4
Illumination of the processing chamber, LED light strip,
and On/Off button
The following function elements are illuminated differently depending on
the machining process and sub-process.
Machining operation
Sub-process
Processing chamber
LED light strip
ON/OFF button
Unit off –
Main switch on
-
Off
Off
Blue, constant
Switch the unit on –
Booting process
-
Off
Off
Yellow, constant
Self-test
Off
White, pulsating
Yellow, constant
Starting position
White, pulsating
White, pulsating
Yellow, constant
Complete
White, constant
White, constant
Green, constant
Errors
Red, constant
Red, constant
Green, constant
The unit is ready to re-
ceive processing opera-
tions
Status OK
Status OK
White, constant
Green, constant
Warning – Operation
is continued; infor-
mation at the end of
the operation can be
ignored – e.g. water
pressure or water
level critical; tool at
end of service life
White, constant
White, constant
Green, constant
Unit is in operation
Status OK
White, constant
Progress bars
displayed in blue
and white, fully in
green
Green, constant
Problem – Process
pauses and can be
restarted; e.g. tool
broken, water pres-
sure inadequate
White, constant
Yellow, constant
Green, constant
Serious error –
Process stopped;
e.g. broken block
Red, constant
Red, constant
Green, constant
Processing concluded
successfully
Door closed
White, constant
Green, constant
Green, constant
Door open
White, constant
White, constant
Green, constant
Door closed again
White, constant
White, constant
Green, constant
