80
Appendix 1 Specifications
Item SE1-QB
Readable codes
QR Code (Model 1 and Model 2), MicroQR, SQRC (*1), iQR, PDF417,
MicroPDF417, MaxiCode, Data Matrix, Aztec, and EAN.UCC
Composite symbol
EAN-13/8, UPC-A/E, UPC/EAN with add-on, Interleaved 2 of 5 (ITF),
Standard 2 of 5 (STF), Code 39, Codabar (NW-7), Code 93, Code 128,
GS1-128 (EAN-128), and GS1 DataBar (RSS)
Skew angle
360°
Scanning resolution
0.167 mm (6.6 mils) min. for two-dimensional codes
0.125 mm (4.9 mils) min. for barcodes
Elevation angle (skew)
±50
Tilt angle (pitch)
±50
Light source
LED (red)
Scanning
specifications
Reading confirmation
Blue LED, and beeper
Bluetooth
®
Built-in
Bluetooth
®
wireless device compliant with Bluetooth
®
Specification Ver. 2.1+EDR
Interface
Profile(s) supported
SPP (Serial Port Profile),
HID (Human Interface Device Profile)
Input power
requirements
Main power
LR6 (AA) alkaline battery (× 2) or AA rechargeable nickel-metal
hydride battery (× 2)
(A rechargeable nickel-metal hydride battery eneloop
®
(battery capacity
1900 mAh or equivalent) is recommended. Make sure that the
rechargeable nickel-metal hydride battery is the correct capacity before
use.)
Operating time
50 hours (*2)
Operating temperature
range
-5
to 50
C
Operating humidity range
10% to 90% RH (
3)
Storage temperature range
-10
to 60
C
Storage humidity range
5% to 95% RH (
3)
Environmental
conditions
Ambient illuminance
range
10,000 lux or less
Dimensions (W) × (D) × (H)
100 × 41 × 27 mm (3.9 × 1.6 × 1.1 inches)
Weight
Approx. 60 g (excluding the batteries)
(
1) To use SQRC outside of Japan, contact your Denso Wave representative.
(
2) Reference values obtained by in-house measurement
· Battery in use: AA rechargeable nickel-metal hydride battery eneloop
®
battery capacity 1900 mAh. Fresh batteries are fully charged
after refreshing by the dedicated charger.
· Connection target: BA11 communications adapter
· Code scanning is repeated every five seconds.
(
3) Sharp temperature change, dewing or freezing not allowed, wet-bulb temperature 30
C max.
