manualshive.com logo in svg

Denso Intelligent Tester II, Operator'S Manual

Share
Download
Denso Intelligent Tester II Operator'S Manual Download Page 122

7  Handling

- 113 -

7

Handling

Pay attention to the following points when handling the Intelligent Tester II and its accessories.

Do not leave this tester or any of its accessories exposed to direct sunlight for long periods of time.
In locations with high humidity, the display back light can deteriorate and the brightness decrease. Use and store in 

locations with low humidity.

Also, in low-temperature locations, the display response may be slow.

This phenomenon is normal and is caused by the characteristics of the LCD display.

When cleaning the tester or accessories, never use paint thinner or any other solvent or volatile oil product. This could 

cause deformation, discoloration, and other such problems as well as loss of function. Wipe gently with a soft cloth dipped 
in a diluted neutral detergent.

After updating diagnosis software, all setting parameters that were changed using the tool option function will be reset to 

their default settings (factory settings).
Go back and manually change settings, as needed.

When the Intelligent Tester II is left unused for a prolonged time, the clock may become inaccurate or stop altogether. If 

this happens, reset the clock.

If the internal battery is allowed to remain completely drained for a long time, this will drastically reduce its service life. 

Even when not using the Intelligent Tester II, charge the internal battery at least once a month.

When disposing of the Intelligent Tester II or any of its accessories, please do the following.

The Intelligent Tester II and its accessories contain electronic parts installed using solder that includes lead. In order to 

prevent damage to the environment resulting from this lead, ask the waste processing company to handle this equipment 
separate to ordinary non-burnable material.

The plastic case of the Intelligent Tester II is made of polycarbonate, ABS, and acrylic. Excluding the clear panel 

(acrylic), the plastic parts have materials abbreviations stamped inside. In order to recycle these compound plastic 
products, ask the waste processing company to handle the different plastics separately.

The main unit of the Intelligent Tester II and the oscilloscope cartridge have a lithium ion internal battery. Dispose of used 

internal batteries in accordance with the regulations of the nation and region.

Handling Precautions

Disposal

Email: [email protected]  Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands