Denso DN-DSM, Owner'S Manual, Page: 31 / 39

11
Items such as the alarm judgment sensitivity and clock can be set or changed in the DN-DSM manager.
For the setting method, see the DN-DSM Manager Owner's Manual.
The inattention of the driver, poor driving posture, sleep and drowsiness statuses and the vehicle in-
formation are saved on the SD memory card. The images taken when each alarm operated are also
saved.
The clock must be set after shipment from the factory or disconnecting the vehicle battery.
Set the clock according to the following procedure.
•
For details on checking the operation records, see the DN-DSM Manager Owner's Manual.
•
Because operation records are personal data, saving data is not set (disabled) in the initial settings.
Change the setting as necessary, while understanding and accepting that when the setting is changed to
save (enabled), personal data may be saved.
ADVICE
Operation Records
Setting Function
Clock Setting
Use the DN-DSM manager to create a clock setting file on the SD
memory card
Insert the SD memory card into the main unit
Turn ON the power of the main unit at the time set in " "
After ten seconds or more have elapsed, turn OFF the power
of the main unit
The set value is reflected the next time the power is turned on.
• If the clock is not set, a notification sound is emitted when the power supply of the main unit is turned on to
alert the driver that the clock has not been set.
• The clock cannot be set if the while the SD memory card write protection is enabled. Release write protec-
tion before setting the clock.
ATTENTION