Denso BHT-BASIC 100 SERIES Programmer'S Manual Download

Page: 505 / 577

Chapter 18. TCP/IP

497

426

Connection closed; transfer aborted.

450

Requested file action not taken.
File unavailable (e.g., file busy).

451

Requested action aborted: local error in processing.

452

Requested action not taken.
Insufficient storage space in system.

500

Syntax error, command unrecognized.
This may include errors such as command line too long.

501

Syntax error in parameters or arguments.

502

Command not implemented.

503

Bad sequence of commands.

504

Command not implemented for that parameter.

530

Not logged in.

532

Need account for storing files.

550

Requested action not taken.
File unavailable (e.g., file not found, no access).

551

Requested action aborted: page type unknown.

552

Requested file action aborted.
Exceeded storage allocation (for current directory or dataset).

553

Requested action not taken.
File name not allowed.

Reply Codes

Description

Summary of Contents for BHT-BASIC 100 SERIES


































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BHT-BASIC 100 SERIES

Reviews:

Related manuals for BHT-BASIC 100 SERIES

Brands by name

Popular brands

Denso BHT-BASIC 100 SERIES, Programmer'S Manual

Search results

Summary of Contents for BHT-BASIC 100 SERIES

Reviews:

Related manuals for BHT-BASIC 100 SERIES

Brands by name

Popular brands