251
Syntax:
LINE INPUT #filenumber,stringvariable
Parameter:
filenumber
A numeric expression which returns a value from 1 to 16.
stringvariable
A string variable.
Description:
LINE
INPUT
#
reads data from a device I/O file (a communications device file or
bar code device file) specified by
filenumber
and assigns it to
stringvari-
able
.
•
filenumber
is a number assigned to the device I/O file when it was opened.
• A
LINE
INPUT
#
statement cannot assign a numeric variable. (An
INPUT
#
statement can do.)
• Reading data from a communications device file:
A
LINE
INPUT
#
statement reads all of the string literals preceding a CR code
and assigns them to
stringvariable
except for CR codes and LF codes
which immediately follow a CR code.
If a
LINE
INPUT
#
statement reads data longer than the allowable string length
before reading a CR code, it ignores only the overflowed data and completes exe-
cution, causing no run-time error.
• Reading data from a bar code device file:
A
LINE
INPUT
#
statement reads the scanned data into
stringvariable
.
If a
LINE
INPUT
#
statement reads data longer than the allowable string length,
it ignores only the overflowed data and completes execution, causing no run-time
error.
File I/O statement
LINE INPUT #
Reads data from a device I/O file into a string variable.
TIP
If the maximum number of digits has been omitted in the read code specifica-
tions of the
OPEN
"BAR:"
statement (except for the universal product codes),
then the
LINE
INPUT
#
statement can read bar codes of up to 99 digits. To
read bar codes exceeding 40 digits, you should define a sufficient string variable
length beforehand.
Summary of Contents for BHT-BASIC 100 SERIES
