Denso BHT-604Q User Manual Download Page 74

Page: 74 / 184

BHT-604Q

4.5.5 System Environment Settings (SET SYSTEM Menu)

Use the following procedure to set the system environment.

Select “4: SET SYSTEM” at the SYSTEM MENU and then press the

ENT

key.

The SET SYSTEM menu screen screen displays as shown on the right.

“1: EXECUTE PROGRAM”:

Sets the auto-start execution program to be executed when the power is

turned ON.

“2: DISPLAY”:

Sets the message version (English or Japanese).

“3: DATE/TIME”:

Sets the calendar clock (date and time).

“4: QRCODE”:

Sets the code reading conditions (black/white inverted label rading

function, inverted 2D code reading function, decode label, added option

data for the 2D codes, minimum number of read digits for read codes (ITF, Codabar), light and sensor

off time).

“5: COMMUNICATION”:

Sets the communication environment (interface port and communication parameters).

“6: KEY”:

Defines the functions of the shift key and magic keys.

“7: RESUME”:

Sets the resume function.

“8: DEFRAG”:

Defragments the drive.

“9: TCP/IP”:

Displays the setting menu for TCP/IP, FTP and DHCP.

Refer to the following section for details of the above items.

Press the

key to return to the SYSTEM MENU.

Summary of Contents for BHT-604Q

























































































































































































Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands

Denso BHT-604Q, User Manual

Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands