Denso BHT-604Q User Manual Download Page 138

Page: 138 / 184

126

BHT-604Q

4.5.12 Setting the Remote Wake-up (SET REMOTE WAKEUP Menu)

n on the right.

: REMOTE WAKEUP]:

Enables or disables remote wake-up.

:TRANSMIT SPEED]:

Sets the transmission speed for remote wake-up.

ress the

key to return to the SYSTEM MENU.

Use the cursor keys ([

▲

] [

▼

]) or numerical keys ([1] [2]) to highlight the

the settings with the cursor keys ([

◄

] [

►

]) and press the

ENT

key.

Use the following procedure to perform remote wake-up settings.

Press the

key while holding down the

key at the SYSTEM MENU.

The SET REMOTE WAKEUP menu displays as show

item to be set.

Highlight

Press the

key to return to the SYSTEM MENU.

Summary of Contents for BHT-604Q

























































































































































































Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands

Denso BHT-604Q, User Manual

Search results

Summary of Contents for BHT-604Q

Reviews:

Related manuals for BHT-604Q

Brands by name

Popular brands