Denso BHT-400-CE Reference Manual Download Page 231

Page: 231 / 347

- 225 -

Strength

Acquires the radio field strength.

￭

Syntax

[VB]

Public Shared ReadOnly Property

Strength

As Integer

[C#]

public static int

Strength

{

get

;}

￭

Property

Radio field strength (%)

Default value: Radio field strength at the time of initialization.

￭

Exceptions

Name of Exception

Meaning

DeviceNotFoundException No NIC device was found.
DeviceLoadException

The NIC device is not ready.

[Ex.] Acquire the radio field strength.

[VB] Dim Strength As Integer = RF.SiteSurvey.Strength

[C#] int Strength = RF.SiteSurvey.Strength;

Summary of Contents for BHT-400-CE




























































































































































































































































































































































Search results

Summary of Contents for BHT-400-CE

Reviews:

Brands by name

Popular brands

Denso BHT-400-CE, Reference Manual

Search results

Summary of Contents for BHT-400-CE

Reviews:

Brands by name

Popular brands