Denso BHT-1306B, User Manual

Page: 35 / 256

23
Barcode Handy Terminal
2.5 About Easy Pack Ad for BHT-1300
The BHT-1300 is equipped with the simplified operating application “Easy Pack Ad for BHT-1300” for the BHT in the
factory default setting.
2.5.1 Features
This software can handle the following three tasks.
Collect
(data collection) Repeatedly enters the data on the product number and its quantity and then saves that data in
the JISSEKI.CSV file.
1-to-1 Verify: Scans the data on the item and compares that data against the master data. If there is a
mismatch between these data sets, an error message is issued.
1-to-n Verify Scans the data on each of the “n” number of items and compare that data against the master
data. If there is a mismatch between these data sets, an error message is issued.
You can save the JISSEKI.CSV file in any folder with the drag-and-drop function in Windows Explorer if the BHT is
connected to your PC via the USB cable. See Chapter 5.4 “USB Communication”.
2.5.2 How to Start
1.
In Step 4 in Chapter 2.4, select “1: Easy Pack Ad” and press the
ENT
key.
The screen on the right is displayed.
2.
Press the
SCAN
key to start Easy Pack Ad for BHT-1300.
The screen on the right is displayed.

Point

You can also use the
M1
key to start Easy Pack Ad for
BHT-1300, but the screen in Step 1 is not shown on the screen
when you operate next time. To turn off Easy Pack Ad, press
the
M2
key.
3.
The screen on the right is displayed on completion of the reading.

Point
 For how to use Easy Pack Ad for BHT-1300, refer to its manual
available from our QBdirect website (