Denso BHT-1260BWB-CE, User Manual

Page: 90 / 251

78
BHT-1200 Series
4.4.3 System Properties
“System Properties” is used to set up various settings that control how the BHT works.
The following icons are in the System Properties.
[ 1] Control Panel: Sets up the windows operating environment.
[ 2] Scanner: Sets up how the BHT reads barcodes and
QRcodes.
[ 3] File System: Initializes the Flash memory, RAM memory
and registry.
[ 4] Power Management: Sets up the power saving mode.
[ 5] Key: Sets up how the keypad keys work.
[ 6] Input Panel: Sets up how the input panel work.
[ 7] Status Display: Sets the status icons of the common tasks to
show or hide in the task bar.
[ 8] Taskbar: Sets the taskbar to show or hide on the
desktop.
[ 9] USB Setting: Sets up the USB communication mode .
[10] G sensor: Calibrates the G sensor.
[11] BHT Backup: Backs up data and restores the registry.
[12] Startup Config: Sets up how the BHT starts up after a reset or full reset.
[13] RegEdit: Edits, imports and exports the registry.
[14] OS Update: Updates the OS.
[15] Wireless LAN: Sets up a wireless LAN network.
[16] Bluetooth: Connects to a Bluetooth® device.
[17] Wireless WAN Sets up a wireless WAN network. (Only for BHT-1200QG)
[18] Network Settings: Changes the network settings.
[19] Internet Explorer Options: Changes the IE additional options.
[20] Remote Desktop: Changes the Remote Desktop settings.
[21] Log Manager: Retrieves logs.
[22] SQRC: Opens the SQRC setting menu. (Only for BHT-1200Q)
To open the System Properties, t
ap “3:System Properties” in the System Menu.
[1] Control Panel
“Control Panel” is used to set up the windows operating environment.
To open, double tap the
“Control Panel” icon in the System Properties.
Refer to Chapter 4, 4.2 Start Menu
– Control Panel for details.