Denso BHT-1260BWB-CE, User Manual

Page: 242 / 251

230
BHT-1200 Series
9.3 CU-1200 Power Supply
Power for the CU is supplied from a wall socket via the dedicated AC adapter.
Connect the AC adapter outlet plug to the CU power inlet connector, then plug in the adapter into the wall socket.
Mishandling of the CU may result in electric shock, overheating or smoking.
Read the following instructions prior to use.

Never disassemble or modify the CU.
 Never place the CU in a microwave oven or high-pressure container.

Never use the CU if smoke, abnormal noises or odors are being emitted.

If any of the above abnormalities occur, immediately unplug the AC adapter.

If foreign material or water gets into the CU, immediately unplug the AC adapter from the wall
socket or CU.

If the CU housing is damaged by being dropped, immediately unplug the AC adapter from the
wall socket or CU.

Never use the CU to charge a non-dedicated battery.

Never touch the output terminals with any metal object.

Use the dedicated AC adapter only.
 Use only specified voltage.

Never use the AC adapter if the power cord is damaged (e.g., exposed or broken lead wires).
AC adapter
Power inlet connector
Wall plug