Denso BHT-1260BWB-CE, User Manual

Page: 181 / 251

169
Barcode Handy Terminal/2D code Handy Terminal
Hand Held Terminal
Barcode Handy Terminal
4.8.4 Data Edit
The Data Edit menu is used to set up the
parameters for each code to edit the scanned
data.
Tap each button to open the parameters.
[1] EAN/UPC
The screens shown on the right are displayed
when the
“EAN/UPC” button is double tapped in
the Data Edit menu.
Check Digit: Check the box to add the check
digit to the code data.
Delete Lead-0: Check the box to delete a
leading '0' from the UPC-A data.
Convert to UPC-A: Check the box to convert a
UPC-E code to the UPC-A code.
[2] CODE 39
The screen shown on the right is displayed when the
“CODE 39” button is
double tapped in the Data Edit menu.
Check Digit: Check the box to add the check digit to the CODE39 data.
Start/Stop Character: Check the box to add start/stop characters to the
CODE39 data.
BHT-1200B BHT-1200Q