Denso BHT-1170BWB-CE, User Manual

Page: 46 / 219

34
BHT-1170BWB-CE / BHT-1171BWB-CE
3.4
The user can use Ethernet connection via the CU-1111.
Place the BHT on the CU-1111 and transmit data.
egory 5 (Cat 5) Ethernet cable or higher is required when using the CU-1111 in 100BASE-TX
networks. Successful communication may not be possible with other cables.
he Ethernet cable or pull the Ethernet cable strongly. Failure to
rear of the CU-1111.

When use Ethernet communication via the CU-1111, connect the Ethernet cable to the CU-1111
beforehand.
3.4.2 USB / RS-232C Communication
The user can use USB / RS-232C connection via the CU-1133.
Place the BHT on the CU-1133 and transmit data.
The BHT RS-232C interface has no signal lines for ActiveSync / WMDC,
therefore the BHT cannot transmit data with ActiveSync / WMDC by directly connecting to the
hostcomputer.
.1 Ethernet Communication
Requests
Handling the CU-1111

A Cat

Do not forcibly insert the Plug of t
observe this may result in damage to the connector or cable.

The MAC address is written on the
Ethernet
Host Computer
BHT
CU-1111
USB / RS232C
communication
BHT
Host Computer
CU-1133