Denso BHT-1170BWB-CE, User Manual

Page: 43 / 219

31
Barcode Handy Terminal
3.3 Using the Keypad
3
eric keys to be entered.
To enter “120” for example, press the “1”, “2” and “0” keys sequentially.
er and then reenter the
lphabet entry mode at the program. Refer to the “BHT API Reference Manual"
3 3.2 Enterin habet Data
In alphabet entry mode, press a numerical key to input the alphabet character assigned to that key.
numeric entry mode.
entry mode
BHT API Reference Manual"
or "BHT Class Library Reference Manual" for further details.
3
ch to the shift status which enables the different character assigned to that key.
T Class Library Reference Manual" for further details.
There are two SHIFT key modes –-“Nonlock mode” and “Onetime mode”.
while the SHIFT key is held down.
ey in addition to enabling the
shift status only while the SHIFT key is held down.
The default setting is “Nonlock mode”.
The SHIFT key mode can be switched in “System Properties”.
Refer to “4.4 System Menu Details – 4.4.3 System Properties – [5] key” for further details.
It is also possible to change the sift status with the program.
Refer to the “BHT API Reference Manual” or “BHT Class Library Reference Manual” for further details.
.3.1 Entering Numerical Data
The default setting is numeric entry mode, enabling numbers written on the top of num
If the wrong number is incorrectly entered, press the BKSP key to delete the numb
correct number.
It is also possible to switch to a
or "BHT Class Library Reference Manual" for further details.
. g Alp
Press the ALPHA key to switch to alphabet entry mode.
Press the ALPHA key once again to return to
Numeric entry mode Alphabet
ALPHA key
It is also possible to switch to alphabet entry mode at the program. Refer to the “
.3.3 Entering Data using shift status
Press the SHIFT key to swit
Refer to the “BHT API Reference Manual" or "BH
“Nonlock mode” enables the shift status only
“
Onetime mode” enables the shift status for one key after pressing the SHIFT k