Denso BHT-1170BWB-CE, User Manual

Page: 123 / 219

111
Barcode Handy Terminal/2D code Handy Terminal
4.5.5 Profiles menu
“Profiles” is used to set up the wireless network security.
To open, tap the “Profiles” tab in the Wlan manager.
Connection Priority: Sets the network connection priority when multiple
profiles are available.
Highest priority: Connects to the network with the highest priority
profile.
Priority order: Connects to an available network profile in the priority
order. The profile connected is shown as an active
profile on the Status section in the information tab
page. Attempts to reconnect to the highest priority
profile available until connected if the wireless network
is disconnected.
- Notes -
・
The “Highest priority” is recommended if only one combination for the access point
SSID and security type is used.
・
If the “Priority order” is selected, the BHT attempts to connect to a profile one by one in
the priority order until a connection is established. As a result, a connection may take
time to establish. The BHT may connect to an access point with a low priority profile
unexpectedly in places where the multiple access points with the available SSIDs and
security types exist.
“ New...” button: Creates a new profile.
“ Edit...” button: Edits the selected profile.
“ Delete” button: Deletes the selected profile.
“ Scan” button: Scans for access points and shows the access point information.
“ Certificates & PACs” button: Edits the certificates and PACs.